Gears and transmission
Standard Involute Spur Gear (Module 2, 60T)
- Bounding box
- 124.0 × 124.0 × 10 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Standard involute spur gear Diametrical pitch 80mm Module 2 mm Teeth Count 60 Pressure Angle 20 deg Face Width 10 mm Straight teeth with flat crests and sharp profile, top fillets, and rounded tips 5 mm flat-to-curve height
Parameters
| Name | Value | Range |
|---|---|---|
| Diametrical pitch | 80 mm | 50 – 300 |
| Module | 2 mm | 1 – 12 |
| Number of teeth | 60 mm | 10 – 120 |
| Pressure angle | 20 deg | 14.5 – 25 |
| Face width | 10 mm | 5 – 40 |
| Flat-to-curve height | 5 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
