Gears and transmission
Spur Gear Pair 20T / 40T, Module 2
- Bounding box
- 123.9 × 83.9 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
Objective Design and assemble a pair of spur gears and demonstrate the transmission of rotational motion from one gear to the other. Gear Specifications Parameter Gear 1 – Driver Gear 2 – Driven Gear type Spur gear Spur gear Module 2 mm 2 mm Number of teeth 20 40 Pressure angle 20° 20° Face width 10 mm 10 mm Bore diameter 8 mm 8 mm Tasks • Generate or model both spur gears using the given specifications. Use a standard gear generator if required. • Calculate the pitch diameters and the correct centre distance between the gear axes. • Create an assembly with the two gears meshing correctly. • Apply appropriate rotational joints or constraints to both gears. • Apply rotational motion to Gear 1. • Demonstrate that Gear 2 rotates in the opposite direction. • Demonstrate the correct gear ratio and rotational relationship between the two gears.
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 2 mm | 1 – 4 |
| Driver Gear Teeth (Gear 1) | 20 teeth | 10 – 40 |
| Driven Gear Teeth (Gear 2) | 40 teeth | 10 – 80 |
| Pressure Angle | 20 deg | 14.5 – 25 |
| Face Width | 10 mm | 2 – 30 |
| Bore Diameter | 8 mm | 2 – 24 |
| Driver Rotation | 0 deg | -180 – 180 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
