Gears and transmission
Spur Gear 60mm 32T Hub
- Bounding box
- 60.0 × 60.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
gear 60mm 32tooth 4.2teeth
Parameters
| Name | Value | Range |
|---|---|---|
| Outside Diameter | 60 mm | 20 – 150 |
| Number of Teeth | 32 | 8 – 80 |
| Face Width | 8 mm | 2 – 25 |
| Bore Diameter | 4.2 mm | 2 – 20 |
| Pressure Angle | 20 deg | 14.5 – 25 |
| Hub Diameter | 14 mm | 6 – 40 |
| Hub Height | 6 mm | 0 – 25 |
| Set Screw Hole Dia | 2.5 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
