Gears and transmission
Spur Gear 24T M2.5
- Bounding box
- 65.0 × 65.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 9, 2026
Download
Free to download and use. See the terms.
The prompt
generate a spur gear using the following dimensions: Parameter | Dimension | | **Number of teeth (N)** | 24 | | **Module (m)** | 2.5 mm | | **Pressure angle** | 20° | | **Pitch diameter (D)** | 60 mm | | **Outside diameter (Do)** | 65 mm | | **Root diameter (Dr)** | 53.75 mm | | **Base diameter (Db)** | 56.38 mm | | **Circular pitch** | 7.854 mm | | **Tooth thickness at pitch circle** | 3.927 mm | | **Addendum** | 2.5 mm | | **Dedendum** | 3.125 mm | | **Whole tooth depth** | 5.625 mm | | **Face width** | 15 mm | | **Bore diameter** | 20 mm | | **Keyway** | 6 mm × 2.8 mm | | **Gear thickness** | 15 mm |
Parameters
| Name | Value | Range |
|---|---|---|
| Number of teeth | 24 | 10 – 80 |
| Module | 2.5 mm | 0.5 – 8 |
| Pressure angle | 20 deg | 14.5 – 25 |
| Face width | 15 mm | 5 – 60 |
| Bore diameter | 20 mm | 6 – 60 |
| Keyway width | 6 mm | 2 – 12 |
| Keyway depth (radial) | 2.8 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a