Organic and sculpted
Spiral Cam Push-Button
- Bounding box
- 119.9 × 30.2 × 120 mm
- Engine
- Organic B-rep
- Parameters
- 0
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
1. CORE MECHANISM CONCEPT - Action: Central spreader bar pushes compliant clip legs radially outward -> legs ride along expanding spiral cam walls -> button spins 90° -> legs snap into drop-off lock pockets. - Key Rule: Round/symmetrical walls create zero spin torque. Walls MUST expand outward in radius along a spiral path to force rotation. 2. TARGET DIMENSIONS & ANGLES - Outer Button Diameter: 16 mm – 20 mm (gives outer torque leverage while staying clothing-sized) - Total Stack Height: 4.0 mm – 5.5 mm (low-profile, flush against fabric) - Center Pivot Boss: 2.5 mm – 3.5 mm diameter (prevents side-wobble during spin) - Cam Wall / Ramp Angle: 35° – 45° constant tangent angle (below 30° stalls from friction; above 55° is too hard to push) - Spiral Radial Expansion: 1.5 mm – 2.5 mm increase in inner radius over a 90° arc - Lock Pocket Step: 0.8 mm – 1.2 mm crisp radial drop-off at the end of the 90° spiral - Running Clearance: 0.35 mm – 0.50 mm gap between moving parts & clip channel width 3. CRITICAL CAD FIXES (ANTI-JAMMING) - Continuous Spiral Path: Replace multi-faceted lofts/steps with one smooth logarithmic or Archimedean spiral curve from entry to lock pocket. - Fillet Sharp Corners: Add 0.5 mm – 1.0 mm fillets to all interior corners, tooth tips, and spreader edges so the clip slides instead of biting. - Widen Pinch Points: Ensure the channel between the central spreader bar and inner cam wall is at least 0.4 mm – 0.6 mm wider than the clip leg thickness. - Lead-In Chamfers: Bevel the top entry edges where the compliant clip first touches down so it never catches flat.
Parameters
This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Glock 19 Lower Receiver
Glock 19 lower receiver
BioBuzz FTC Robot
I need a realistic model made for this years First Tech challenge 2026 BioBuzz competition. I need to create an intake system for the robot. I need a Main robot chassis, left/right
Turtle Basking Dock
I need a basking dock that will sit on top of a 75 gallon tank it’s from left to right will be 18 inch’s and from back to front will be 20 inch’s and the ramp for the turtle to com
Push-Button Ratchet Mechanism
Create a simple 3D-printable push-button ratchet mechanism. Pressing a button once should rotate a circular wheel by exactly 30 degrees, then lock it in that position. Releasing th
Stable Monitoring Buoy
Design a simple, robust, 3D-printable floating buoy for an autonomous environmental monitoring system. PRIORITY #1: IT MUST FLOAT STABLY IN WATER WITH THE ELECTRONICS AND SENSORS
Scale Truss Bridge
Act as a structural design engineer. Create a 3D solid CAD model of a scale Warren/Pratt truss bridge in millimeters. Units: Millimeters (mm) Overall Dimensions: - Bridge Span (L
