3D preview of Soap Dispenser Neck and Screw Cap
Loading the interactive model…
Interactive 3D model of Soap Dispenser Neck and Screw Cap

Gears and transmission

Soap Dispenser Neck and Screw Cap

5 views
Bounding box
72.4 × 24.7 × 15.6 mm
Engine
Precision B-rep
Parameters
15
Published
November 15, 2026

Download

Free to download and use. See the terms.

The prompt

Create TWO separate editable solid CAD parts for a compact liquid-soap dispenser opening that I can import into Rhino 3D. PART 1 — CYLINDRICAL NECK Create a hollow cylindrical neck with: - Outer diameter: 20 mm - Outer radius: 10 mm - Total height: 15 mm - Wall thickness: 1.5 mm - Inner diameter: 17 mm - The bottom must be completely flat so the neck can be positioned and Boolean Unioned with my existing soap-case body in Rhino. - Do not create any bottle or additional body. THREAD ON NECK - Create one continuous helical external screw thread. - Do NOT create separate horizontal rings. - Thread pitch: 2 mm - Thread depth: approximately 0.6 mm - Threaded length: 8–10 mm - Leave the lower 5–7 mm smooth. - Add a 0.5 mm chamfer at the top edge to make the cap easier to start. - Keep the internal surface of the neck smooth. PART 2 — MATCHING SCREW CAP Create a separate cap designed specifically to fit the neck. - Internal thread must match the neck's external thread. - Provide 0.3–0.4 mm clearance between mating surfaces for 3D printing. - Cap wall thickness: 2 mm - Cap height: 10–12 mm - Rounded outer edges. - Add an internal sealing surface/lip to reduce liquid leakage. - Cap should screw on and off smoothly by hand. - No gears, springs, or complicated mechanisms. IMPORTANT - Keep the neck and cap as TWO separate solid bodies. - Do not fuse them together. - Keep all dimensions accurate. - The neck must be suitable for Boolean Union with another solid in Rhino. - The cap must remain a separate removable component. - Make the geometry suitable for further editing in Rhino 3D. - Export as STEP (.STEP/.STP). - Preferably keep each part as a separate solid/body in the STEP file.

Parameters

NameValueRange
Neck Outer Diameter20 mm10 – 40
Neck Wall Thickness1.5 mm0.8 – 3
Neck Height15 mm8 – 30
Thread Pitch2 mm0.5 – 5
Thread Depth0.6 mm0.2 – 1.5
Threaded Length9 mm3 – 14
Neck Top Chamfer0.5 mm0.1 – 2
Cap Thread Clearance0.35 mm0.05 – 1
Cap Wall Thickness2 mm1 – 5
Cap Height11 mm6 – 20
Cap Top Thickness2 mm1 – 5
Cap Outer Edge Fillet0.8 mm0 – 2
Sealing Lip Clearance0.2 mm0.05 – 1.5
Sealing Lip Height1.5 mm0.5 – 5
Exploded Layout Gap50 mm30 – 120

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Soap Dispenser Neck and Screw Cap - Free CAD Model (STEP, STL) | TextoCAD