Smooth Trunnion Bracket

Generate a mechanical suspension trunnion component. The base is a flat mounting plate shaped like an asymmetrical delta shield or chevron, [40mm] tall and [30mm] wide, extruded to a thickness of [4mm]. Cut three [3.2mm] diameter holes into this plate arranged in a triangular pattern for M3 bolt clearance. Extending outward and upward from the front face of this delta shield plate is a solid 45-degree cylindrical elbow with an outer diameter of [16mm]. At the top end of this 45-degree elbow, attach a perpendicular cylindrical barrel to act as the pivot trunnion. This trunnion barrel should be [20mm] wide. Cut a central bore through the entire trunnion barrel with exactly an [8mm] diameter to accommodate a press-fit brass sleeve for an M5 threaded rod pivot axis. Ensure all unions between the plate, the 45-degree elbow, and the trunnion barrel are smooth and structurally solid."

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.