Plates and panels
Smart Cane for the Visually Impaired
- Bounding box
- 50.0 × 50.0 × 1125.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Please create a 3D design for a smart cane for the visually impaired. The shaft should feature a solar panel and warning speakers to alert the user to obstacles. A small camera should be positioned near the tip of the cane. The handle section—with a diameter of approximately 5 cm—should house the circuit board and speaker, and be contoured for a comfortable grip.
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft Diameter | 20 mm | 12 – 30 |
| Shaft Length | 1000 mm | 500 – 1400 |
| Rubber Tip Diameter | 30 mm | 18 – 45 |
| Rubber Tip Length | 35 mm | 20 – 70 |
| Handle Diameter | 50 mm | 30 – 70 |
| Handle Length | 120 mm | 80 – 200 |
| Handle End Roundover | 8 mm | 2 – 20 |
| Finger Groove Count | 3 count | 0 – 6 |
| Finger Groove Depth | 4 mm | 0.5 – 10 |
| Finger Groove Spacing | 20 mm | 8 – 45 |
| Solar Panel Length | 200 mm | 60 – 400 |
| Solar Panel Thickness | 3 mm | 1 – 8 |
| Solar Panel Wrap Angle | 100 deg | 40 – 170 |
| Camera Housing Diameter | 16 mm | 8 – 26 |
| Camera Housing Length | 16 mm | 8 – 30 |
| Camera Height Above Ground | 70 mm | 40 – 250 |
| Speaker Diameter | 24 mm | 10 – 40 |
| Speaker Count | 2 count | 1 – 4 |
| Speaker Protrusion | 8 mm | 3 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Snorlax Phone Stand
Create a compact, 3D printable, support-free cute Snorlax phone stand with a small footprint measuring 90mm wide, 80mm deep, and 70mm tall. The model features a simplified, low-pol
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec