Plates and panels
Small House Assembly
- Bounding box
- 506.5 × 605.7 × 311.8 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D model of a small house with a 25 cm length and 30 cm width. Add a symmetrical 30-degree hip roof with a roof height of 8.66 cm. The common rafter length is 17.32 cm and the hip rafter length is 21.36 cm. Add a roof truss with a 25 cm span. Divide the truss into 7 panels following the Fibonacci-inspired sequence 1, 2, 3, 5, 3, 2, 1, where 1 unit equals 1.47 cm. Therefore, the panel lengths are 1.47, 2.94, 4.41, 7.35, 4.41, 2.94, and 1.47 cm. Make the roof truss symmetrical and use straight structural members for the top chord, bottom chord, and diagonal braces. Use centimeters as the modeling unit.
Parameters
| Name | Value | Range |
|---|---|---|
| House Length | 250 mm | 100 – 1000 |
| House Width | 300 mm | 100 – 1000 |
| Floor Thickness | 10 mm | 2 – 50 |
| Wall Thickness | 20 mm | 5 – 100 |
| Wall Height | 200 mm | 50 – 500 |
| Roof Height (rise) | 86.6 mm | 20 – 500 |
| Rafter Diameter | 8 mm | 2 – 50 |
| Common Rafters per Face | 5 | 1 – 20 |
| Truss Member Diameter | 5 mm | 1 – 30 |
| Truss Span | 250 mm | 100 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con