Plates and panels
SIP Panel Production Line
- Bounding box
- 15900.0 × 2325.0 × 2000.0 mm
- Engine
- Precision B-rep
- Parameters
- 39
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
SIP_Linka_6panelu ├── 01_Montazni_stul_500mm │ ├── Deska_stolu │ ├── Zarazky_delka (3 sady) │ └── Linear_vedeni_portal ├── 02_Portal_nanaseni │ ├── Nosny_ramec │ ├── PTFE_trysky_10mm │ └── Vodni_postrik_zadni ├── 03_Valeckovy_dopravnik ├── 04_Lis_6000x1250 │ ├── Dolni_deska │ ├── Horni_deska │ ├── Hydraulika (nebo jen obrys) │ └── Vodici_sloupy ├── 05_Vydejni_stul └── 06_PLC_a_rizeni (volitelně)
Parameters
| Name | Value | Range |
|---|---|---|
| Assembly table width | 500 mm | 200 – 800 |
| Assembly table length | 1500 mm | 500 – 3000 |
| Table top thickness | 20 mm | 10 – 50 |
| Linear guide height | 10 mm | 5 – 20 |
| Linear guide width | 10 mm | 5 – 20 |
| Number of stop sets | 3 mm | 1 – 5 |
| Stop block size | 20 mm | 10 – 40 |
| Portal width | 1250 mm | 800 – 1500 |
| Portal overall height | 1500 mm | 1000 – 2000 |
| Beam / post size | 60 mm | 30 – 100 |
| Number of nozzles | 6 mm | 3 – 12 |
| Nozzle outer diameter | 10 mm | 5 – 15 |
| Nozzle length | 50 mm | 20 – 100 |
| Water spray header width | 100 mm | 50 – 200 |
| Conveyor length | 2000 mm | 1000 – 4000 |
| Conveyor width | 1250 mm | 800 – 1500 |
| Roller diameter | 50 mm | 20 – 80 |
| Roller spacing | 150 mm | 100 – 300 |
| Conveyor top surface height | 800 mm | 600 – 1000 |
| Side frame size | 50 mm | 20 – 80 |
| Press length | 6000 mm | 3000 – 8000 |
| Press width | 1250 mm | 800 – 1500 |
| Press overall height | 2000 mm | 1500 – 3000 |
| Platen thickness | 80 mm | 50 – 150 |
| Guide column diameter | 100 mm | 50 – 200 |
| Hydraulic cylinder bore | 80 mm | 50 – 150 |
| Hydraulic rod diameter | 50 mm | 30 – 100 |
| Number of hydraulic cylinders | 2 mm | 1 – 4 |
| Output table length | 6000 mm | 3000 – 8000 |
| Output table width | 1250 mm | 800 – 1500 |
| Table top thickness | 30 mm | 15 – 60 |
| Table top height | 800 mm | 600 – 1000 |
| PLC cabinet width | 600 mm | 400 – 1000 |
| PLC cabinet depth | 400 mm | 300 – 600 |
| PLC cabinet height | 1800 mm | 1000 – 2200 |
| Gap after assembly table | 200 mm | 50 – 500 |
| Gap before press | 200 mm | 50 – 500 |
| PLC X offset from start | 500 mm | 0 – 3000 |
| PLC Y offset from centerline | 1500 mm | 500 – 3000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con