Gears and transmission
Sink-Edge Holder (edge 25-200 mm)
- Bounding box
- 132.0 × 153.5 × 46.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Sink-edge holder for the water-powered gearbox with the sink edge thickness adjustable from 25 to 200 mm: ring frame that carries the gearbox bottom cap and bolts to its six M3 positions, plus a narrow rigid arm with a stiffening rib that spans any edge width and ends in a hooked outer wall
Parameters
| Name | Value | Range |
|---|---|---|
| Turbine chamber inner radius | 45 mm | 42 – 52 |
| Turbine chamber wall | 6 mm | 5 – 10 |
| Bottom cap flange thickness | 5 mm | 3 – 6 |
| M3 clearance hole | 3.5 mm | 3.2 – 3.8 |
| Bolt head counterbore diameter | 6.4 mm | 5.5 – 8 |
| Bolt head counterbore depth | 3.2 mm | 2.5 – 3.5 |
| SINK EDGE THICKNESS (25 to 200 mm) | 30 mm | 25 – 200 |
| Extra play across the sink edge | 1.5 mm | 0.5 – 4 |
| Plate thickness | 6 mm | 5 – 10 |
| Ring frame outer radius | 56 mm | 54 – 62 |
| Drain opening radius (funnel hangs through) | 41 mm | 38 – 44 |
| Locating lip height | 4 mm | 2 – 8 |
| Locating lip clearance around the cap | 0.4 mm | 0.2 – 1.2 |
| Saddle wall width along the sink edge | 112 mm | 80 – 140 |
| Saddle wall thickness | 6 mm | 4 – 10 |
| How far the saddle walls hang down | 30 mm | 15 – 50 |
| Arm bar width (the span across the sink edge) | 60 mm | 40 – 112 |
| Arm stiffening rib height | 10 mm | 6 – 14 |
| Arm stiffening rib thickness | 6 mm | 4 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.