Plates and panels
Side Seat Plate
- Bounding box
- 38.0 × 19.5 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 3, 2026
Download
Free to download and use. See the terms.
The prompt
I need two. One of them lets call side seat plate, is 38" by 19.5". there are 6 holes total. all 7/8" diameter holes. back left hole is 1" from the back edge, and 2.25 inches in from the left side. Top right hole is 2.25" from the right side, and 1" back. Botom left hole is 5.25" down from the back left hole, same 2.25" from left side. Bottom right hole is 5.25" down from the top right hole, same 2.25" from the left side. let's get that far and I'll tell you about the two middle holes
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Width | 38 mm | 30 – 50 |
| Plate Depth | 19.5 mm | 15 – 30 |
| Plate Thickness | 3 mm | 1 – 10 |
| Hole Diameter | 1.5 mm | 0.5 – 4 |
| Margin from Back Edge | 1 mm | 0.5 – 5 |
| Margin from Side Edge | 2.25 mm | 1 – 10 |
| Row Spacing | 5.25 mm | 2 – 15 |
| Edge Fillet Radius | 0.5 mm | 0 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con