Plates and panels
Sheet Metal Tray with Chamfered Flange Corners
- Bounding box
- 400.0 × 200.0 × 43.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing sheet metal model. Change the two 20 mm downward side flanges and the 20 mm upward end flange so that their outer free corners are chamfered at 45 degrees. The 45-degree chamfers should be applied only to the outer/free ends of the flanges, while keeping the main plate dimensions and all existing bend dimensions unchanged. Do not change: Plate size: 400 × 200 mm Material thickness: 3 mm Side flange height: 20 mm End flange height: 20 mm Bend angles: 90 degrees Keep the model fully parametric and editable.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 400 mm | 50 – 1000 |
| Plate Width | 200 mm | 20 – 600 |
| Material Thickness | 3 mm | 0.5 – 20 |
| Flange Height | 20 mm | 2 – 100 |
| Bend Angle | 90 deg | 80 – 100 |
| Chamfer Size | 5 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service