Plates and panels
Sheet Metal Channel Panel (3 mm Aluminium)
- Bounding box
- 400.0 × 200.0 × 43.0 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric sheet metal part made from 3 mm thick aluminum. Dimensions of the flat plate: Length: 400 mm Width: 200 mm Thickness: 3 mm Bends: Bend both long sides downward by 20 mm, forming two parallel 20 mm deep flanges along the 400 mm edges. Bend one short side upward by 20 mm, forming a 20 mm high flange along one 200 mm edge. The opposite short side remains flat and unbent. Use 90-degree bends. Keep the overall geometry symmetric along the length where applicable. The model must be fully parametric and editable. Use separate parameters for plate length, plate width, thickness, flange height, and bend angle.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 400 mm | 100 – 1200 |
| Plate Width | 200 mm | 50 – 600 |
| Sheet Thickness | 3 mm | 0.5 – 10 |
| Flange Height | 20 mm | 5 – 100 |
| Bend Angle | 90 deg | 45 – 135 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service