Plates and panels
Sheet Metal Bracket
- Bounding box
- 570.1 × 360.0 × 3.2 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
This is a sheet metal part. Looking top down. Resembling a triangle. 90° bottom left. 75°top left. The side on the left with the 75° and 90° angles is 360mm long. The top side angling down toward the right is 480mm. The bottom length is 570 east to west. Then it goes up 150mm. Between the 150mm side and the 480 mm side is a radius. I believe it’s close to 400mm. If not tell me the exact radius
Parameters
| Name | Value | Range |
|---|---|---|
| Left side height | 360 mm | 10 – 1000 |
| Bottom length | 570 mm | 10 – 2000 |
| Top slanted side length | 480 mm | 10 – 2000 |
| Angle at top-left | 75 deg | 10 – 170 |
| Right vertical height | 150 mm | 1 – 1000 |
| Fillet radius | 400 mm | 0.1 – 1000 |
| Sheet thickness | 3 mm | 0.5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con