Shaft with Locking Collar (Haste com Anel de Ajuste)

10 + 11 – Haste com anel de ajuste Create a round shaft, diameter 25 mm, length 300 mm, with a 20 mm long section of 3 mm chamfer at one end. Add a shaft collar of outer diameter 48 mm, width 30 mm, inner diameter 25 mm, with a radial threaded hole M8 for a locking screw. Place the collar 100 mm from the chamfered end. Axis along X. Arquivo sugerido: 10_11_haste_anel.step 12 – Placa de apoio com ponta macia Create a rectangular steel plate 20 mm thick, 140 mm wide, 260 mm tall, with four M10 through holes at 15 mm from each corner. Attach on one face a rectangular pad 24 mm thick, 100 mm wide, 200 mm tall, centered, with 3 mm rounded edges. Add a central hole of 25 mm diameter through the plate for the shaft. Model plate and pad as two separate bodies. Arquivo sugerido: 12_ponta_macia.step 8 e 14 – Manivela e manopla de giro Create a hand crank: a flat steel arm 220 mm long, 30 mm wide, 12 mm thick, with a 25 mm hole at one end for the shaft and a perpendicular cylindrical handle of 22 mm diameter and 100 mm length at the other end. Add 5 mm fillets at the junction between arm and handle.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.