Gears and transmission
Servo pan-tilt turret (from render) with Nerf payload
- Bounding box
- 525.0 × 300.0 × 405.0 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Pan-tilt servo turret modelled on the uploaded render: aluminum base plate, two-servo pan stack with frame and standoffs, aluminum turntable, two black tapered yoke plates, gear-driven tilt (big gear + pinion + servo on left yoke), black cradle plates with cross rods, rear aluminum battery box with LiPo, top-mounted optic. Payload is a Nerf blaster envelope.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate square | 300 mm | 200 – 450 |
| Base plate thickness | 10 mm | 5 – 20 |
| Base hole dia | 9 mm | 5 – 16 |
| Base hole pitch | 270 mm | 150 – 420 |
| Pan frame square | 170 mm | 120 – 240 |
| Pan frame thickness | 6 mm | 3 – 12 |
| Pan frame bottom height | 75 mm | 60 – 120 |
| Pan servo body height | 55 mm | 30 – 62 |
| Pan center shaft dia | 16 mm | 10 – 30 |
| Turntable length | 200 mm | 140 – 300 |
| Turntable width | 170 mm | 150 – 260 |
| Turntable thickness | 12 mm | 6 – 25 |
| Turntable bottom height | 95 mm | 80 – 160 |
| Yoke inner gap | 150 mm | 130 – 220 |
| Yoke plate thickness | 8 mm | 5 – 16 |
| Yoke base width | 190 mm | 140 – 220 |
| Yoke top width | 120 mm | 80 – 180 |
| Yoke height | 250 mm | 200 – 340 |
| Tilt axis height above turntable | 185 mm | 120 – 260 |
| Tilt axle dia | 12 mm | 8 – 20 |
| Gear module | 1.5 mm | 1 – 3 |
| Big gear teeth | 60 pcs | 40 – 90 |
| Pinion teeth | 20 pcs | 12 – 30 |
| Gear face width | 8 mm | 4 – 14 |
| Cradle plate length | 220 mm | 160 – 300 |
| Cradle plate below axis | 70 mm | 60 – 100 |
| Cradle plate above axis | 90 mm | 70 – 130 |
| Cradle outer half-width | 65 mm | 55 – 72 |
| Cradle plate thickness | 8 mm | 4 – 12 |
| Cradle cross rod dia | 14 mm | 8 – 20 |
| Blaster body length | 280 mm | 150 – 420 |
| Blaster body width | 60 mm | 30 – 80 |
| Blaster body height | 100 mm | 60 – 130 |
| Blaster barrel dia | 34 mm | 20 – 50 |
| Blaster barrel length | 150 mm | 60 – 250 |
| Optic height | 55 mm | 35 – 80 |
| Battery box length | 105 mm | 70 – 160 |
| Battery box height | 120 mm | 90 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
