Plates and panels
Scroll Chuck Plate
- Bounding box
- 115.0 × 115.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
Description: The scroll plate is the rotating plate inside the chuck body. Its spiral grooves engage with the three jaws and cause them to move together. Drawing: Circular plate Spiral groove on the face Central bore Thickness according to the part drawing Fusion 360: Plane: XZ Plane Draw the outside circle from your drawing. Extrude to the specified thickness. Create the central bore. Create the spiral groove. The three jaw paths are arranged 120° apart. Important: The scroll plate must be inside the chuck body, underneath the jaws. It should not sit on top of the chuck body.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Outer Diameter | 115 mm | 60 – 200 |
| Plate Thickness | 14 mm | 6 – 30 |
| Central Bore Diameter | 32 mm | 10 – 60 |
| Spiral Start Radius | 22 mm | 8 – 60 |
| Spiral Pitch (per turn) | 10 mm | 9 – 25 |
| Spiral Turns | 3 rev | 1 – 6 |
| Groove Width | 6 mm | 2 – 6.5 |
| Groove Depth | 5 mm | 1 – 12 |
| Rim Chamfer | 1.5 mm | 0.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Flat Bolt-Pattern Disc
Create a flat circular disc with an outer diameter of 280 mm and a thickness of 6 mm. In the exact center, add a through-hole with a diameter of 8 mm. Surrounding the center hole,