Gears and transmission
Scissor Lift Take-Up
- Bounding box
- 222 × 141.3 × 240 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D parametric assembly model of a modular single-stage scissor lift take-up mechanism for an industrial conveyor belt. The assembly consists of: 1. Base Structure: Two parallel horizontal I-beams serving as the ground tracks. 2. Scissor Links: Two pairs of crossing flat link arms forming an "X" configuration, joined at the center by a revolute pivot axis. 3. Lower Connections: A fixed pivot pin on the left lower base, and a sliding foot on the right lower base constrained to move horizontally along the top flange of the I-beam. 4. Top Cradle: A concave, U-shaped saddle mounted on the upper pivots of the scissor links to securely support a heavy horizontal cylindrical conveyor take-up pulley. 5. Kinematics: The mechanism must articulate smoothly as a single unit when the right sliding foot moves horizontally, raising and lowering the top pulley cradle.
Parameters
| Name | Value | Range |
|---|---|---|
| Base beam length | 240 mm | 180 – 400 |
| Base outer width | 100 mm | 60 – 200 |
| I-beam flange width | 20 mm | 12 – 40 |
| I-beam height | 30 mm | 20 – 60 |
| I-beam flange thickness | 5 mm | 3 – 8 |
| I-beam web thickness | 4 mm | 2 – 8 |
| Link arm thickness | 6 mm | 4 – 12 |
| Link arm width | 18 mm | 10 – 30 |
| Pivot pin diameter | 8 mm | 5 – 20 |
| Distance between pivot centers | 160 mm | 100 – 300 |
| Lift angle from horizontal | 35 deg | 15 – 60 |
| Saddle radius for pulley | 35 mm | 20 – 60 |
| Saddle wall thickness | 6 mm | 3 – 12 |
| Sliding clearance | 0.25 mm | 0.1 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
