Router Wall Mount

Create a single-piece parametric wall mount for a Huawei B535-232a router. Router dimensions: - width: 219.0 mm - height: 137.7 mm - maximum body depth near the lower center: 25.1 mm - body depth near the lower side edges: 20.6 mm Required clearance: - 0.7 mm clearance on each side - 0.7 mm depth clearance - 20 mm clearance between the router and the wall Mount design: - one-piece unified U-shaped wall mount - router is inserted vertically from the top - router must be removable without tools - internal width: 220.4 mm - internal usable depth: 25.8 mm - two side support walls, each 3.2 mm thick and 55 mm high - two separate lower support shelves, each 38 mm wide - keep the center of the bottom completely open for ventilation, SIM slot and cables - lower support shelf depth: 14 mm - front retaining lip: 6 mm high and 3.2 mm thick - rear crossbar: 24 mm high and 4 mm thick - include four vertical elongated mounting slots, each 5 mm wide and 12 mm high - use minimum 3 mm internal fillets - avoid blocking router ports and ventilation - make the part suitable for FDM printing in PETG - avoid unsupported overhangs greater than 45 degrees - output an editable parametric CAD model and STEP file

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.