Plates and panels
Rounded Rectangular Plate with Three Holes
- Bounding box
- 450.0 × 105.0 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Flat rectangular plate 450 mm long, 105 mm wide, 3 mm thick. All four corners rounded with 5 mm radius. Three through holes of 6.5 mm diameter, centres 16 mm from one 105 mm end, and 21 mm, 52.5 mm and 84 mm from one long edge. Make all dimensions parameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 450 mm | 10 – 1000 |
| Width | 105 mm | 10 – 500 |
| Thickness | 3 mm | 0.5 – 20 |
| Corner Radius | 5 mm | 0.5 – 30 |
| Hole Diameter | 6.5 mm | 1 – 50 |
| Hole Centers from 105 mm End | 16 mm | 0 – 400 |
| Hole 1 from Long Edge | 21 mm | 0 – 200 |
| Hole 2 from Long Edge | 52.5 mm | 0 – 200 |
| Hole 3 from Long Edge | 84 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service