Everything else
Rounded-Corner Rectangular Tray
- Bounding box
- 540.0 × 410.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
The inner_corner_radius parameter has no effect on the geometry. Rebuild the cavity instead of filleting it afterwards: sketch a 520 x 390 mm rectangle whose four corners are rounded with inner_corner_radius, extrude that sketch 50 mm downward from the top face to cut the cavity, then apply floor_fillet_radius to the bottom edges of the cavity. Keep all other dimensions unchanged.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length | 540 mm | 200 – 1200 |
| Outer Width | 410 mm | 150 – 1200 |
| Overall Height | 60 mm | 20 – 300 |
| Floor Thickness | 10 mm | 2 – 50 |
| Wall Thickness | 10 mm | 2 – 50 |
| Cavity Length | 520 mm | 50 – 1100 |
| Cavity Width | 390 mm | 50 – 1100 |
| Cavity Depth | 50 mm | 5 – 250 |
| Inner Corner Radius | 40 mm | 0 – 150 |
| Outer Corner Radius | 10 mm | 0 – 100 |
| Floor Fillet Radius | 5 mm | 0 – 25 |
| Top Rim Fillet Radius | 2 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like