Plates and panels
Rolling Tray 126x81
- Bounding box
- 126.4 × 81.4 × 7.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a flat rectangular rolling tray measuring 126.4 mm long, 81.4 mm wide, and 7.5 mm tall, with 4.5 mm rounded outer corners. Make the base plate 2 mm thick with a 2 mm thick raised perimeter wall all the way around, leaving a 5.5 mm deep inner rolling surface. Cut a small 15 mm wide by 3 mm deep finger notch into the top center of the front wall for easy lifting.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length | 126.4 mm | 40 – 300 |
| Outer width | 81.4 mm | 30 – 250 |
| Overall height | 7.5 mm | 4 – 40 |
| Outer corner radius | 4.5 mm | 1 – 20 |
| Base plate thickness | 2 mm | 0.8 – 6 |
| Perimeter wall thickness | 2 mm | 1.2 – 8 |
| Notch width | 15 mm | 5 – 60 |
| Notch depth from top edge | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Gabinete Gamer DeX com Suporte Interno para Hub USB-C
Atualize o projeto 3D existente sem mudar o restante do design. - Esconda o hub USB-C em um compartimento interno com tampa removível. - Crie um suporte para o hub entre duas pare
Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
Interdigital Electrode Pattern
### FIG. 2 — Top plan view of the interdigital electrode pattern *Suggested template: USPTO Line Art / Electronic Circuit* ``` FIG. 2: A top plan (bird's-eye) view of an interdigi
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
FPV Drone Frame (Exploded)
I want a design of a FPV 5 inch carbon frame of a FPV drone racing. Inspied on switchback five 33 frame and similar to BCROW v7. 5mm arms and 2mm top and bottom plate. Make a desig
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
