Gears and transmission
Rod and Pin Cutting Jig, Print-Ready with Rail Slot
- Bounding box
- 70.3 × 30.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Print-ready version of the pin and rod cutting jig: rounded corners, chamfered bed edge and bore lead-ins, saw slot raised clear of the underside, and a slot underneath (full-length web groove plus a 64 mm key-block pocket) so it sits on the table rail like the gearboxes.
Parameters
| Name | Value | Range |
|---|---|---|
| Rod diameter | 8 mm | 6 – 10 |
| Rod cut length | 40.5 mm | 30 – 60 |
| Drive flat depth | 0.6 mm | 0.3 – 1.2 |
| Drive flat length from the rod end | 5 mm | 3 – 8 |
| Pin stock diameter | 3 mm | 2 – 4 |
| Pin cut length | 21 mm | 15 – 30 |
| Radial clearance around the stock in the bores | 0.15 mm | 0.05 – 0.3 |
| Saw slot width | 1.8 mm | 1 – 3 |
| Clearance around the table rail web and key block | 0.2 mm | 0.1 – 0.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.