Loading the interactive model…
Interactive 3D model of Robot Car with Servo Steering and Rear DriveEverything else
Robot Car with Servo Steering and Rear Drive
2 views
- Bounding box
- 262.0 × 142.5 × 160.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- September 10, 2026
Download
Free to download and use. See the terms.
The prompt
create a robort car with 4 wheels where back wheel should use one motor and front wheels should have servo steering mechanism with rebbery pie
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 200 mm | 150 – 250 |
| Chassis Width | 120 mm | 90 – 150 |
| Chassis Height | 40 mm | 30 – 60 |
| Chassis Wall Thickness | 5 mm | 3 – 10 |
| Wheel Diameter | 65 mm | 50 – 80 |
| Wheel Width | 20 mm | 10 – 30 |
| Axle Diameter | 5 mm | 3 – 8 |
| Servo Length | 40 mm | 30 – 50 |
| Servo Width | 20 mm | 15 – 25 |
| Servo Height | 40 mm | 30 – 50 |
| DC Motor Length | 50 mm | 40 – 60 |
| DC Motor Width | 25 mm | 20 – 30 |
| DC Motor Height | 25 mm | 20 – 30 |
| Pi Length | 85 mm | 70 – 100 |
| Pi Width | 56 mm | 45 – 70 |
| Pi Thickness | 5 mm | 3 – 8 |
| Battery Length | 70 mm | 50 – 90 |
| Battery Width | 40 mm | 30 – 50 |
| Battery Height | 20 mm | 15 – 30 |
| Steering Linkage Length | 80 mm | 60 – 100 |
| Steering Linkage Diameter | 5 mm | 3 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS