Robofest Camera Top Plate 120x80x3

Create a separate top plate for my Robofest project. Dimensions: 120 mm × 80 mm × 3 mm thickness, with R8 mm rounded corners. Keep the plate centered above the existing 140 × 100 × 3 mm electronics plate. The top plate is specifically for mounting a fixed front-facing camera, camera bracket, sensors, and other lightweight upper components. Add 4 symmetric Ø3–4 mm structural standoff holes near the corners for attaching the top plate to the electronics plate. Add a dedicated camera-mounting hole pattern in the central/front area of the plate: provide 4 Ø3 mm clearance holes arranged symmetrically for attaching a separate camera bracket. Keep the exact spacing parametric/editable so it can be adjusted to match the actual camera bracket. Position the camera mount toward the front and keep the camera's forward view unobstructed. Do not add motor holes, axle holes, wheel cutouts, battery holes, random decorative holes, or unnecessary openings. Keep sufficient material around every hole and maintain adequate clearance between the camera holes and the 4 standoff holes. Make the plate symmetric, lightweight, professional, manufacturable, and fully dimensioned/parametric. Fully constrain the sketch and ensure there are no over-defined sketches, rebuild errors, self-intersections, or zero-thickness geometry. Do not modify any existing plates or the overall design. Create it as a separate SolidWorks part and provide SLDPRT and STEP/STP-compatible output. Final geometry: clean 120 × 80 × 3 mm top plate, R8 corners, 4 structural standoff holes + 4 dedicated camera-bracket m

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.