Plates and panels
Relief Medallion with Figure and Nameplate
- Bounding box
- 60.0 × 60.0 × 8.2 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 27, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3d relief medallion that can be milled from brass stock from this image. Ensure there is depth on the human figure as well some of the "Io" nameplate. The plant background should be in shallower relief, though not flat. The border of the coin should be smoothed out, replacing the hammered uneven look in the source image.
Parameters
| Name | Value | Range |
|---|---|---|
| Diameter | 60 mm | 40 – 100 |
| Thickness | 8 mm | 4 – 20 |
| Border Width | 4 mm | 2 – 8 |
| Border Corner Radius | 1.5 mm | 0.5 – 3 |
| Figure Height | 28 mm | 15 – 40 |
| Figure Width | 18 mm | 10 – 30 |
| Figure Relief Depth | 2.5 mm | 1 – 4 |
| Nameplate Width | 20 mm | 10 – 30 |
| Nameplate Height | 8 mm | 4 – 15 |
| Nameplate Relief Depth | 2 mm | 1 – 3 |
| Plant Relief Depth | 1.2 mm | 0.5 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con