Plates and panels
Reinforced Concrete Basement with Post-Cast Belt Waterstop
- Bounding box
- 3600 × 2400 × 2949.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
CAD plan: it is known that an attached underground library building is cast-in-place reinforced concrete basement: structural roof thickness 250mm, external wall thickness of 250mm, bottom plate thickness of 300mm, post-cast belt width of 700mm: the basement is not insulated; Since the underground water level is higher than the design elevation of basement floor all the year round, the basement shall be waterproof with Grade I waterproofing, and advanced waterstop structure shall be considered for post-pouring belt.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length | 3600 mm | 2000 – 12000 |
| Outer width | 2400 mm | 1500 – 8000 |
| Clear height from bottom plate to roof | 2400 mm | 2000 – 6000 |
| Bottom plate thickness | 300 mm | 200 – 600 |
| External wall thickness | 250 mm | 150 – 500 |
| Roof slab thickness | 250 mm | 150 – 500 |
| Post-cast belt width | 700 mm | 400 – 1200 |
| Steel plate width across joint | 300 mm | 150 – 600 |
| Steel plate thickness | 3 mm | 1 – 10 |
| Bottom Z of vertical steel plate | 800 mm | 0 – 2000 |
| Injection tube diameter | 20 mm | 8 – 50 |
| Bottom Z of vertical injection tube | 800 mm | 0 – 2000 |
| Hydrophilic strip width | 20 mm | 10 – 50 |
| Hydrophilic strip thickness | 10 mm | 5 – 30 |
| Bottom Z of vertical hydrophilic strip | 800 mm | 0 – 2000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four