Everything else
Rectangular Block with Counterbored Hole and Corner Holes
- Bounding box
- 100.0 × 60.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 100 × 60 × 20 mm rectangular block. Add four 8 mm through‑holes, one near each corner, 10 mm from each edge. Add a 2 mm chamfer on the top outer perimeter. Add a central 20 mm diameter counterbored hole: 10 mm deep counterbore at 30 mm diameter, then a 12 mm through‑hole. Fillet all vertical edges at 3 mm. Export as STEP and STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 100 mm | 10 – 200 |
| Width | 60 mm | 10 – 200 |
| Height | 20 mm | 5 – 100 |
| Corner Hole Diameter | 8 mm | 2 – 20 |
| Hole Edge Distance | 10 mm | 2 – 50 |
| Counterbore Diameter | 30 mm | 5 – 60 |
| Counterbore Depth | 10 mm | 1 – 50 |
| Through Hole Diameter | 12 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like