Plates and panels
Rear Door Trim Panels with Upper Window Opening
- Bounding box
- 1490.0 × 1280.0 × 75.5 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- October 7, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing panels. Add an upper window opening to each panel. Window opening size: 510 mm wide 330 mm high Center it horizontally in the upper area. Use rounded corners approximately R20. Add a 12 mm wide molded border around the window opening. The window area must be a real opening through the panel. Keep both panels mirrored.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel Width | 735 mm | 300 – 1200 |
| Panel Height | 1280 mm | 400 – 2000 |
| Panel Thickness | 3 mm | 1 – 10 |
| Panel Corner Radius | 25 mm | 1 – 120 |
| Gap Between Panels | 20 mm | 0 – 200 |
| Center Crown Proud Height | 12 mm | 0 – 40 |
| Mounting Perimeter Width | 40 mm | 10 – 150 |
| Surface Curvature Inset | 32 mm | 5 – 150 |
| Rear Return Flange Depth | 18 mm | 0 – 60 |
| Rear Return Flange Wall | 2.5 mm | 1 – 8 |
| Window Opening Width | 510 mm | 100 – 700 |
| Window Opening Height | 330 mm | 80 – 700 |
| Window Corner Radius | 20 mm | 2 – 80 |
| Window Center (above panel mid-line) | 355 mm | 0 – 600 |
| Molded Border Width | 12 mm | 2 – 60 |
| Molded Border Proud Height | 3 mm | 0.5 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service