Organic and sculpted
Rack-and-Pinion Arbor Press Handle Shaft and Lever
- Bounding box
- 120 × 6.1 × 6.2 mm
- Engine
- Organic B-rep
- Parameters
- 0
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create two separate components for a rack-and-pinion arbor press. Component A: Handle shaft - Material: EN24 - Journal diameter: Ø40 mm - Overall length: 280 mm - Integral pinion: 14 teeth - Module: 4 mm - Pitch diameter: Ø56 mm - Keyway: 12 × 8 × 40 mm Component B: Lever - Material: C45 - Bar diameter: Ø32 mm - Length: 700 mm - Include mounting hub and Ø50 mm ball grip. Use accurate solid geometry and export both components as STEP files.
Parameters
This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Glock 19 Lower Receiver
Glock 19 lower receiver
BioBuzz FTC Robot
I need a realistic model made for this years First Tech challenge 2026 BioBuzz competition. I need to create an intake system for the robot. I need a Main robot chassis, left/right
Turtle Basking Dock
I need a basking dock that will sit on top of a 75 gallon tank it’s from left to right will be 18 inch’s and from back to front will be 20 inch’s and the ramp for the turtle to com
Push-Button Ratchet Mechanism
Create a simple 3D-printable push-button ratchet mechanism. Pressing a button once should rotate a circular wheel by exactly 30 degrees, then lock it in that position. Releasing th
Stable Monitoring Buoy
Design a simple, robust, 3D-printable floating buoy for an autonomous environmental monitoring system. PRIORITY #1: IT MUST FLOAT STABLY IN WATER WITH THE ELECTRONICS AND SENSORS
Scale Truss Bridge
Act as a structural design engineer. Create a 3D solid CAD model of a scale Warren/Pratt truss bridge in millimeters. Units: Millimeters (mm) Overall Dimensions: - Bridge Span (L
