Gears and transmission
QUAD-X Disaster Response UAV — Exploded Assembly
- Bounding box
- 5632.0 × 204.0 × 175.0 mm
- Engine
- Precision B-rep
- Parameters
- 39
- Published
- September 13, 2026
Download
Free to download and use. See the terms.
The prompt
Design a professional engineering-grade QUAD-X UAV for disaster management, search & rescue, and emergency assessment. Create a realistic, lightweight and modular drone with: • 4 BLDC motors in X configuration • Carbon-fiber/composite arms and frame • Central protected electronics bay for Pixhawk-class flight controller • Centrally mounted removable LiPo battery tray • Front 2-axis camera/gimbal mount for RGB/thermal camera • Underbody QUICK-RELEASE MODULAR PAYLOAD BAY for first-aid kits, sensors or emergency beacon • Rugged lightweight landing gear with high ground clearance • Replaceable motor mounts and arms • Vibration-isolated flight-controller and camera mounts • Protected and organized cable routing • Low center of gravity and balanced weight distribution • Standard M3/M4 fasteners and 3D-printable brackets Target size: 550–650 mm motor-to-motor, compatible with 10–15 inch propellers. Make the design aerodynamic, compact, rugged, field-repairable and easy to manufacture. Generate: 1. Complete 3D assembly 2. Exploded view 3. Top/front/side views 4. Dimensioned engineering drawing 5. Payload mechanism detail 6. Battery/electronics layout 7. Bill of Materials The final design must look like a real aerospace/NCC disaster-response prototype, not a toy or futuristic concept. Prioritize technical feasibility, modularity, lightweight construction and practical disaster-response functionality.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 60 mm | 20 – 200 |
| Central Frame Length | 200 mm | 120 – 300 |
| Central Frame Width | 160 mm | 100 – 260 |
| Central Frame Height | 35 mm | 20 – 60 |
| Arm Length | 250 mm | 150 – 400 |
| Arm Tube Width | 25 mm | 15 – 50 |
| Arm Tube Height | 15 mm | 8 – 40 |
| Motor Mount Length | 40 mm | 20 – 80 |
| Motor Mount Width | 40 mm | 20 – 80 |
| Motor Mount Thickness | 10 mm | 4 – 25 |
| Motor Can Diameter | 40 mm | 20 – 60 |
| Motor Can Height | 35 mm | 15 – 60 |
| Motor Shaft Diameter | 5 mm | 2 – 10 |
| Motor Shaft Length | 12 mm | 5 – 30 |
| Propeller Diameter | 380 mm | 250 – 500 |
| ESC Length | 40 mm | 20 – 70 |
| ESC Width | 20 mm | 10 – 40 |
| ESC Height | 10 mm | 4 – 25 |
| Landing Gear Length | 300 mm | 150 – 450 |
| Landing Gear Width | 200 mm | 100 – 300 |
| Landing Gear Height | 150 mm | 80 – 250 |
| Battery Tray Length | 150 mm | 80 – 250 |
| Battery Tray Width | 80 mm | 40 – 150 |
| Battery Tray Height | 40 mm | 20 – 80 |
| Gimbal Mount Length | 80 mm | 40 – 140 |
| Gimbal Mount Width | 60 mm | 30 – 100 |
| Gimbal Mount Height | 70 mm | 30 – 120 |
| Payload Bay Length | 120 mm | 60 – 200 |
| Payload Bay Width | 100 mm | 50 – 180 |
| Payload Bay Height | 50 mm | 25 – 90 |
| Flight Controller Length | 80 mm | 40 – 120 |
| Flight Controller Width | 50 mm | 30 – 90 |
| Flight Controller Height | 20 mm | 10 – 40 |
| PDB Length | 100 mm | 50 – 160 |
| PDB Width | 80 mm | 40 – 130 |
| PDB Thickness | 10 mm | 4 – 25 |
| M3 Clearance Hole | 3.4 mm | 2.5 – 6 |
| M4 Clearance Hole | 4.5 mm | 3 – 8 |
| Motor Wire Bore | 16 mm | 6 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a