Plates and panels
Plate with Three Rectangular Cutouts
- Bounding box
- 370.0 × 65.0 × 3.2 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
I need a 370mm wide, 65 mm tall, 1/8in thick plate with a 144mm wide, 37mm tall hole cut out on its bottom right corner, 1/16in above the bottom edge of the front face, and 1/4 in in from the right edge of the front face on that bottom corner I also need a hole in the middle of the bottom edge that is 30 mm wide, and 12.7mm tall, it is a hole starting along that bottom edge, centered on the whole part, that cuts in 12.7mm up until the object, and 30mm wide I then need a hole cut out on the left edge of the main object, this hole needs to be 13mm wide, and 32mm tall, the hole, the bottom edge of this hole will be 16mm in from the bottom edge of the main object, the left edge of the hole will be 27.5mm in from the left edge of the main object
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Width | 370 mm | 300 – 500 |
| Plate Height | 65 mm | 50 – 100 |
| Plate Thickness (1/8in) | 3.18 mm | 1 – 10 |
| Cutout 1 Width | 144 mm | 50 – 300 |
| Cutout 1 Height | 37 mm | 10 – 60 |
| Cutout 1 Bottom Offset (1/16in) | 1.59 mm | 0.5 – 5 |
| Cutout 1 Right Offset (1/4in) | 6.35 mm | 1 – 20 |
| Cutout 2 Width | 30 mm | 10 – 100 |
| Cutout 2 Height | 12.7 mm | 5 – 40 |
| Cutout 3 Width | 13 mm | 5 – 30 |
| Cutout 3 Height | 32 mm | 10 – 60 |
| Cutout 3 Bottom Offset | 16 mm | 5 – 40 |
| Cutout 3 Left Offset | 27.5 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Flat Bolt-Pattern Disc
Create a flat circular disc with an outer diameter of 280 mm and a thickness of 6 mm. In the exact center, add a through-hole with a diameter of 8 mm. Surrounding the center hole,