Gears and transmission
Planetary Gearbox 3:1
- Bounding box
- 84 × 84 × 68 mm
- Engine
- 3D Printing B-rep
- Parameters
- 30
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a planetary gearbox with ratio of 1:3
Parameters
| Name | Value | Range |
|---|---|---|
| Housing outer diameter | 70 mm | 40 – 120 |
| Housing length | 34 mm | 20 – 80 |
| Housing wall thickness | 5 mm | 2 – 10 |
| Mounting flange diameter | 84 mm | 60 – 140 |
| Mounting flange thickness | 4 mm | 2 – 10 |
| Mounting bolt hole diameter | 5.5 mm | 3 – 10 |
| Ring gear teeth | 36 mm | 20 – 80 |
| Gear module | 1.5 mm | 0.5 – 3 |
| Ring gear face width | 12 mm | 6 – 30 |
| Ring gear outer diameter | 60 mm | 40 – 120 |
| Sun gear teeth | 18 mm | 10 – 40 |
| Sun gear bore | 8 mm | 4 – 20 |
| Sun gear face width | 12 mm | 6 – 30 |
| Planet gear teeth | 9 mm | 6 – 30 |
| Planet gear bore | 5 mm | 3 – 12 |
| Planet gear face width | 12 mm | 6 – 30 |
| Planet orbit radius | 20.25 mm | 15 – 25 |
| Planet angular spacing | 120 deg | 90 – 180 |
| Carrier plate diameter | 50 mm | 30 – 80 |
| Carrier plate thickness | 8 mm | 4 – 20 |
| Planet pin diameter | 5 mm | 3 – 10 |
| Planet pin length | 14 mm | 8 – 30 |
| Input shaft diameter | 8 mm | 4 – 20 |
| Input shaft length | 30 mm | 15 – 60 |
| Input coupling diameter | 6 mm | 3 – 15 |
| Input coupling length | 8 mm | 4 – 20 |
| Output shaft diameter | 10 mm | 5 – 25 |
| Output shaft length | 30 mm | 15 – 60 |
| Output coupling diameter | 8 mm | 4 – 20 |
| Output coupling length | 10 mm | 4 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.