Gears and transmission
Planetary Gear Set
- Bounding box
- 88 × 88 × 12 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Make me a planetary gear.
Parameters
| Name | Value | Range |
|---|---|---|
| Gear module | 2 mm | 1 – 5 |
| Sun gear teeth | 12 mm | 8 – 24 |
| Planet gear teeth | 12 mm | 8 – 24 |
| Number of planets | 3 mm | 3 – 5 |
| Gear thickness | 8 mm | 4 – 20 |
| Tooth backlash | 0.4 mm | 0.1 – 1 |
| Ring gear outer radius | 44 mm | 30 – 80 |
| Ring base plate thickness | 2 mm | 1 – 5 |
| Carrier plate thickness | 2 mm | 1 – 5 |
| Carrier plate radius | 30 mm | 15 – 60 |
| Pin and post diameter | 5 mm | 3 – 10 |
| Gear center hole diameter | 5.4 mm | 3.2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.