Gears and transmission
Pin-Gear Mating Wheel
- Bounding box
- 953.6 × 953.8 × 20.1 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
create the mating gear for a pin gear the pin gear has 8 pins pin diameter is 8mm center to center distance of pins of the pin gear is 40mm center to center distance mating gear to pin gear is 510 to 520 mm the mating gear has conjugate profile
Parameters
| Name | Value | Range |
|---|---|---|
| Pin gear pin count | 8 | 4 – 20 |
| Adjacent pin centre distance | 40 mm | 20 – 100 |
| Centre distance target | 515 mm | 510 – 520 |
| Face width | 20 mm | 5 – 60 |
| Bore diameter | 20 mm | 5 – 120 |
| Pressure angle | 20 deg | 14 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.