Plates and panels
PETG End Plate with O-Ring Groove and Nut Recesses
- Bounding box
- 100.0 × 80.0 × 5.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a flat rectangular PETG end plate. Dimensions: 100mm wide x 80mm tall x 5mm thick. On the inner face, add a continuous O-ring groove that is 2mm wide and 1.5mm deep, following a rectangular path 5mm from the outer edge. At each of the four corners, add a 5.5mm diameter through-hole for M5 threaded rods. On the outer face, centered over each corner hole, add a hexagonal recess (8mm across flats, 5mm deep) to hold an M5 nut. No supports required. All overhangs under 45 degrees. Must fit Bambu Lab P1S printer.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Width | 100 mm | 10 – 300 |
| Plate Height | 80 mm | 10 – 300 |
| Plate Thickness | 5 mm | 1 – 20 |
| Groove Width | 2 mm | 0.5 – 10 |
| Groove Depth | 1.5 mm | 0.2 – 5 |
| Groove Center Offset from Edge | 5 mm | 1 – 50 |
| Through-Hole Diameter | 5.5 mm | 1 – 20 |
| Hole Center Offset from Edges | 5 mm | 1 – 50 |
| Nut Hex Across Flats | 8 mm | 3 – 30 |
| Nut Recess Depth | 5 mm | 0.5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service