Gears and transmission
Patient Transfer Bridge Unit (PTBU) - Exploded Assembly
- Bounding box
- 29620.0 × 1010.0 × 659.0 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a realistic parametric 3D CAD assembly of a hospital Patient Transfer Bridge Unit (PTBU). Overall dimensions: 2200×950×720 mm (L×W×H), adjustable lift 150 mm, target patient capacity 400 kg. Use a welded SS304 chassis with 60×40×3 mm tubing, four 10-inch locking swivel casters and a 2100×850 mm vertically adjustable upper frame. Lift the upper frame using four synchronized screw jacks driven by one central 48V DC geared motor with brake. Add two parallel hollow stainless-steel slotted winding shafts (2050 mm long, 50 mm OD, 3 mm wall), each with three bearing supports, on opposite long sides of the frame. Include a reinforced 2000×800 mm patient transfer sheet, dual-layer canvas support belts, four load-cell mounting points, motorized sheet tensioning and reversible lateral transfer drive. Add adjustable mechanical hospital-bed docking locks, a 48V battery compartment, control panel, emergency stop, position sensors, guards and removable rounded covers. Show realistic bearings, couplings, gearboxes, fasteners and cable routing. Create separate editable components, an exploded view and STEP export if supported. Medical-grade industrial appearance, brushed stainless steel and white covers. Concept model only; dimensions and 400 kg capacity require engineering validation.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 2200 mm | 1800 – 2600 |
| Chassis Width | 950 mm | 700 – 1200 |
| Chassis Tube Width | 60 mm | 30 – 100 |
| Chassis Tube Height | 40 mm | 20 – 80 |
| Caster Wheel Diameter | 254 mm | 150 – 300 |
| Caster Wheel Width | 50 mm | 30 – 80 |
| Caster Fork Height | 130 mm | 80 – 200 |
| Vertical Lift Stroke | 150 mm | 0 – 250 |
| Upper Frame Length | 2100 mm | 1700 – 2500 |
| Upper Frame Width | 850 mm | 600 – 1100 |
| Frame Tube Width | 60 mm | 30 – 100 |
| Frame Tube Height | 40 mm | 20 – 80 |
| Winding Shaft Length | 2050 mm | 1600 – 2400 |
| Winding Shaft OD | 50 mm | 30 – 80 |
| Winding Shaft Wall | 3 mm | 1.5 – 8 |
| Sheet Slot Width | 8 mm | 3 – 20 |
| Bearing Block Width | 80 mm | 50 – 120 |
| Bearing Block Depth | 60 mm | 40 – 100 |
| Bearing Block Height | 50 mm | 30 – 90 |
| Transfer Sheet Length | 2000 mm | 1500 – 2400 |
| Transfer Sheet Width | 800 mm | 500 – 1100 |
| Transfer Sheet Thickness | 4 mm | 1 – 12 |
| Drive Motor Diameter | 120 mm | 60 – 200 |
| Drive Motor Length | 300 mm | 150 – 500 |
| Screw Jack Screw Diameter | 40 mm | 20 – 80 |
| Screw Jack Nut Size | 70 mm | 40 – 120 |
| Load Cell Length | 100 mm | 60 – 160 |
| Load Cell Width | 50 mm | 30 – 90 |
| Load Cell Height | 40 mm | 20 – 70 |
| Battery Compartment Length | 400 mm | 200 – 700 |
| Battery Compartment Width | 300 mm | 150 – 500 |
| Battery Compartment Height | 200 mm | 100 – 350 |
| Control Panel Width | 300 mm | 150 – 500 |
| Control Panel Height | 200 mm | 100 – 350 |
| Guard Cover Thickness | 3 mm | 1 – 8 |
| Exploded Layout Gap | 300 mm | 50 – 1500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
