Gears and transmission
Parametric Helical Gear
- Bounding box
- 80.5 × 80.5 × 23.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 5
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric helical gear with the following specifications: 24 teeth, normal module of 3 mm, right-hand helix, total face width of 23.1 mm, and a central bore hole with a diameter of 13,.1 mm. Output as a clean solid CAD body.
Parameters
| Name | Value | Range |
|---|---|---|
| Number of teeth | 24 mm | 12 – 80 |
| Normal module | 3 mm | 1 – 8 |
| Face width | 23.1 mm | 5 – 60 |
| Bore diameter | 13.1 mm | 5 – 50 |
| Helix angle (deg, positive = right-hand) | 15 mm | 5 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
Assembled 2WD Sumo Robot
Design a compact, aggressive 2-wheel-drive competition SUMO ROBOT. Main chassis: 260×200×6 mm plywood. 2 STD D-shaft gear motors. 2 wheels: Ø50×20 mm. Controller board: 100×60 mm.