Gears and transmission
Open Front Rolling Machine Housing
- Bounding box
- 400.0 × 300.0 × 350.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
One-piece hollow industrial metal housing for a goldsmith's two-roller adjustable rolling machine. External dimensions 400 mm wide x 300 mm deep x 350 mm high, wall thickness 12 mm. Fused left and right vertical side panels, flat top panel and rear panel; completely open front and open bottom. Two coaxial horizontal shaft clearance bores through side panels for two parallel rollers, 12 mm diameter at assumed 100 mm and 230 mm above the open bottom, with common shaft axis 75 mm behind the front edge. Right side panel has a 12 mm wide x 100 mm tall vertical through-slot for the moving adjustment mechanism, centred at 165 mm above bottom. No gears, rollers, knobs or other mechanisms. Slight external corner radius. Units mm, STEP for Fusion 360.
Parameters
| Name | Value | Range |
|---|---|---|
| External width | 400 mm | 400 – 400 |
| External depth | 300 mm | 300 – 300 |
| External height | 350 mm | 350 – 350 |
| Wall thickness | 12 mm | 12 – 12 |
| Roller shaft clearance diameter | 12 mm | 12 – 12 |
| Shaft centre from front edge | 75 mm | 75 – 75 |
| Lower roller shaft centre above bottom | 100 mm | 100 – 100 |
| Upper roller shaft centre above bottom | 230 mm | 230 – 230 |
| Right side adjustment slot width | 12 mm | 12 – 12 |
| Right side adjustment slot overall height | 100 mm | 100 – 100 |
| Right side slot centre above bottom | 165 mm | 165 – 165 |
| External vertical corner radius | 2 mm | 2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
