Loading the interactive model…
Interactive 3D model of Omni Wheel with Diagonal RollersEverything else
Omni Wheel with Diagonal Rollers
32 views
- Bounding box
- 394.7 × 50.0 × 24.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
build the referrence image i give you with a length of 32mm and use diagional rollers with 8 of them and then make it so the center hole is a hexagon that is 7mm flat to flat
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Thickness | 12 mm | 6 – 30 |
| Side Plate OD | 50 mm | 30 – 120 |
| Side Plate Thickness | 2 mm | 1 – 6 |
| Hub Diameter | 16 mm | 8 – 40 |
| Hex Bore Flat-to-Flat | 7 mm | 4 – 20 |
| Roller Count | 8 | 4 – 12 |
| Roller Orbit Radius | 18 mm | 10 – 50 |
| Roller Length | 20 mm | 10 – 60 |
| Roller Mid Diameter | 18 mm | 8 – 40 |
| Roller End Diameter | 10 mm | 5 – 30 |
| Roller Bore Diameter | 4 mm | 2 – 10 |
| Roller Angle (deg) | 45 deg | 0 – 90 |
| Axle Hole Diameter | 4 mm | 2 – 10 |
| Countersink Diameter | 8 mm | 5 – 15 |
| Countersink Angle (deg) | 90 deg | 60 – 120 |
| Insert Diameter | 6 mm | 4 – 12 |
| Insert Depth | 4 mm | 2 – 10 |
| Lightening PCD Radius | 12 mm | 5 – 30 |
| Lightening Hole Diameter | 8 mm | 3 – 20 |
| Exploded Layout Gap | 40 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS