3D preview of NES Cartridge Drawer Box
Loading the interactive model…
Interactive 3D model of NES Cartridge Drawer Box

Plates and panels

NES Cartridge Drawer Box

1 views
Bounding box
154.6 × 247.6 × 144.5 mm
Engine
3D Printing B-rep
Parameters
28
Published
November 20, 2026

Download

Free to download and use. See the terms.

The prompt

It needs to have slots that will hold up carts if 10 are not in there. Each cart has its own slot that is fairly narrow to not waste too much space. Also the front of the drawer needs a bit of protrusion in the handle so something can be grabbed. Also this needs to fit nicely on an A1 build plate. Not sure if you can reference the designs in maker world for snes and n64 stackable drawers.

Parameters

NameValueRange
Cartridge width135 mm60 – 200
Cartridge thickness20 mm10 – 60
Cartridge height120 mm60 – 200
Number of cartridges10 mm1 – 20
Gap between cartridges2.4 mm1.5 – 8
Divider wall thickness1.6 mm1.2 – 4
Clearance each side of a cartridge0.4 mm0.2 – 1.5
Divider height above drawer floor42 mm10 – 100
Drawer wall thickness3.5 mm1.6 – 6
Play each side of cartridges1.5 mm0.4 – 5
Play at drawer ends2 mm0.5 – 20
Finger notch width60 mm20 – 120
Finger notch height16 mm8 – 40
Finger notch depth2 mm0.6 – 3
Grab lip protrusion8 mm2 – 20
Grab lip height14 mm6 – 40
Shell wall thickness4 mm2 – 10
Drawer sliding clearance0.8 mm0.2 – 2
Clearance behind drawer3 mm1 – 20
Clearance above cartridges2 mm0.5 – 10
Rail height4 mm2 – 10
Rail width4 mm2 – 10
Bottom plate thickness4 mm2 – 12
Top plate thickness6 mm3 – 12
Foot height5 mm2 – 12
Foot diameter10 mm4 – 20
Foot inset from edges16 mm8 – 40
Number of grille slots6 mm0 – 12

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

NES Cartridge Drawer Box - Free CAD Model (STEP, STL) | TextoCAD