Fittings and adapters
Multi-Axis Low Loss Header Assembly
- Bounding box
- 396.2 × 340.0 × 1379.0 mm
- Engine
- Precision B-rep
- Parameters
- 40
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter 216.3 mm, Wall Thickness 8.18 mm. Total barrel cut length is 1230 mm. - End Connections: Top and bottom barrel edges must be capped with standard DN200 BS4504 PN16 welded flanges. - Nozzle Openings (All dimensions measured straight down from the top edge 0mm mark): * At 100mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg) AND One 1/2" BSP socket connection (270 deg) * At 400mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 945mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 1245mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). - Instrumentation: Top DN200 Blank flange requires a central 1/2" BSP socket connection. Bottom DN200 Blank flange requires a central 1" BSP Socket connection. Show clear linear dimension lines tracking center-to-center pitches, total barrel length, and connection diameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel OD | 216.3 mm | 100 – 500 |
| Wall Thickness | 8.18 mm | 1 – 50 |
| Height | 1230 mm | 500 – 3000 |
| Top Flange OD | 340 mm | 200 – 600 |
| Top Flange Thickness | 24 mm | 10 – 50 |
| Top Flange Bore | 18.75 mm | 5 – 40 |
| Top Boss OD | 30 mm | 10 – 100 |
| Top Boss Height | 10 mm | 0 – 30 |
| Bottom Flange OD | 340 mm | 200 – 600 |
| Bottom Flange Thickness | 24 mm | 10 – 50 |
| Bottom Flange Bore | 30.5 mm | 5 – 60 |
| Bottom Boss OD | 40 mm | 10 – 100 |
| Bottom Boss Height | 15 mm | 0 – 40 |
| DN65 Pipe OD | 76.1 mm | 50 – 120 |
| DN65 Wall | 5 mm | 1 – 20 |
| Nozzle Length | 100 mm | 30 – 300 |
| Flange OD | 185 mm | 100 – 300 |
| Flange Thickness | 18 mm | 5 – 40 |
| DN80 Pipe OD | 88.9 mm | 60 – 140 |
| DN80 Wall | 5.5 mm | 1 – 25 |
| Nozzle Length | 100 mm | 30 – 300 |
| Flange OD | 200 mm | 120 – 350 |
| Flange Thickness | 20 mm | 5 – 45 |
| Socket Body OD | 22 mm | 10 – 40 |
| Socket Length | 20 mm | 5 – 50 |
| Socket Bore | 18.75 mm | 5 – 30 |
| Front DN65 100mm Height | 100 mm | 0 – 2000 |
| Front DN65 100mm Angle | 0 deg | 0 – 360 |
| Rear DN80 100mm Height | 100 mm | 0 – 2000 |
| Rear DN80 100mm Angle | 180 deg | 0 – 360 |
| Left Socket 100mm Height | 100 mm | 0 – 2000 |
| Left Socket 100mm Angle | 270 deg | 0 – 360 |
| Right DN65 400mm Height | 400 mm | 0 – 2000 |
| Right DN65 400mm Angle | 90 deg | 0 – 360 |
| Right DN65 945mm Height | 945 mm | 0 – 2000 |
| Right DN65 945mm Angle | 90 deg | 0 – 360 |
| Front DN65 1245mm Height | 1245 mm | 0 – 2000 |
| Front DN65 1245mm Angle | 0 deg | 0 – 360 |
| Rear DN80 1245mm Height | 1245 mm | 0 – 2000 |
| Rear DN80 1245mm Angle | 180 deg | 0 – 360 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con