Gears and transmission
Motorized Worm-Drive Rope Reel
- Bounding box
- 97.0 × 151.0 × 88.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Rope system. The rope is stored on a reel the rope is released/collected via a motor connected to a worm gear, the worm gear is connected to a gear on the reel with the rope on it.
Parameters
| Name | Value | Range |
|---|---|---|
| Motor Body Width (X) | 40 mm | 20 – 80 |
| Motor Body Height (Z) | 40 mm | 20 – 80 |
| Motor Body Length (Y) | 80 mm | 40 – 150 |
| Motor Shaft Diameter | 10 mm | 4 – 20 |
| Motor Shaft Length | 30 mm | 10 – 60 |
| Worm Outside Diameter | 20 mm | 12 – 40 |
| Worm Length | 35 mm | 15 – 70 |
| Worm Bore (Motor Shaft) | 10 mm | 4 – 20 |
| Worm Thread Pitch (Lead) | 6 mm | 3 – 16 |
| Worm Thread Depth | 2 mm | 0.5 – 5 |
| Gear Module | 3 mm | 1 – 6 |
| Gear Teeth | 18 teeth | 10 – 40 |
| Gear Face Width | 12 mm | 4 – 30 |
| Gear Bore | 12 mm | 4 – 30 |
| Drum Diameter | 50 mm | 20 – 100 |
| Drum Length | 60 mm | 20 – 150 |
| Drum Bore | 12 mm | 4 – 30 |
| Flange Diameter | 66 mm | 30 – 140 |
| Flange Thickness | 4 mm | 1 – 15 |
| Rope Diameter | 6 mm | 2 – 16 |
| Rope Turns | 8 turns | 2 – 20 |
| Axle Diameter | 12 mm | 4 – 30 |
| Axle Length | 90 mm | 40 – 200 |
| Worm / Gear Center Distance | 35 mm | 20 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
