Gears and transmission
Motor Test Stand and Mounting Pipe Fit Kit
- Bounding box
- 161.0 × 90.0 × 89.8 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Test stand for the 24 mm motor: base disc, hollow upright mounting pipe, and the motor tower with collet and nut, plus a bayonet skirt coupon, pipe adapter and short fit-test pipe, so the fits can be checked before printing the whole gearbox.
Parameters
| Name | Value | Range |
|---|---|---|
| Motor body diameter | 24 mm | 20 – 28 |
| Motor pocket clearance (diametral) | 0.15 mm | 0.05 – 0.4 |
| Motor body length | 12.5 mm | 10 – 30 |
| Radial clearance of the bayonet sockets | 0.3 mm | 0.15 – 0.5 |
| Width of the four collet slots | 1.2 mm | 0.8 – 2 |
| Mounting pipe outside diameter | 25 mm | 15 – 40 |
| Pipe socket depth | 20 mm | 10 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.