Gears and transmission
Monorail Rack Rail Track Segment
- Bounding box
- 300.0 × 60.0 × 44.5 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
Build a monorail prototype featuring a motorized carriage that travels along the track. The carriage draws its power from the track. It must also be capable of moving up and down (vertically) as well as left and right. The monorail track should be constructed with the understanding that the carriage is propelled by gears; therefore, the track must be a rack rail.
Parameters
| Name | Value | Range |
|---|---|---|
| Track Length | 300 mm | 200 – 600 |
| Track Width | 30 mm | 20 – 60 |
| Track Height | 40 mm | 20 – 80 |
| Rack Module | 2 mm | 1 – 3 |
| Tooth Count | 16 mm | 4 – 20 |
| Pressure Angle | 20 deg | 10 – 30 |
| Power Rail Width | 4 mm | 2 – 6 |
| Power Rail Depth | 3 mm | 1 – 4 |
| Power Rail Spacing | 8 mm | 4 – 10 |
| Guide Slot Width | 4 mm | 2 – 6 |
| Guide Slot Depth | 3 mm | 1 – 4 |
| Guide Slot Spacing | 8 mm | 4 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a