Gears and transmission
Module 2 Straight Rack Gear 120mm
- Bounding box
- 120.0 × 15.0 × 12.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Single-piece straight rack gear compatible with a module 2, 20 degree pressure-angle spur pinion (the user's matching pinion is 20 teeth, pitch diameter 40 mm). Straight rectangular bar 120 mm long x 15 mm wide x 10 mm high, teeth along one long edge, flat rear face for attachment. Standard rack tooth pitch pi*m = 6.283 mm, standard addendum 2 mm and dedendum 2.5 mm. Units mm, STEP for Fusion 360.
Parameters
| Name | Value | Range |
|---|---|---|
| Rack length | 120 mm | 120 – 120 |
| Bar width | 15 mm | 15 – 15 |
| Bar body height | 10 mm | 10 – 10 |
| Module | 2 mm | 2 – 2 |
| Pressure angle | 20 deg | 20 – 20 |
| Root clearance | 0.5 mm | 0.5 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
