Plates and panels
Modular Hybrid Laptop Chassis (Mini-ITX + GPU Module)
- Bounding box
- 350 × 300 × 30 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Add a clean grid of slot ventilation vents on the bottom panel of the main chassis and along the back face of the rear module, keeping a safe margin from the edges and modular joints.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 350 mm | 200 – 400 |
| Depth | 270 mm | 200 – 350 |
| Height | 25 mm | 15 – 40 |
| Wall thickness | 2 mm | 1.2 – 4 |
| GPU module depth | 60 mm | 30 – 100 |
| GPU module height | 30 mm | 20 – 50 |
| Connector width | 80 mm | 40 – 150 |
| Connector height | 12 mm | 6 – 20 |
| Fit clearance | 0.3 mm | 0.2 – 0.5 |
| Bottom slot length | 22 mm | 8 – 40 |
| Bottom slot width | 4 mm | 2 – 8 |
| Bottom slot pitch along X | 28 mm | 10 – 60 |
| Bottom slot pitch along Y | 18 mm | 8 – 40 |
| Bottom margin from edges & modular joint | 18 mm | 5 – 40 |
| Rear slot length (vertical, mm) | 8 mm | 4 – 24 |
| Rear slot width | 3.5 mm | 2 – 8 |
| Rear slot pitch along X | 20 mm | 10 – 60 |
| Rear slot pitch along Z | 12 mm | 6 – 30 |
| Rear vent margin from edges | 8 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Encapsulation Machine Frame with Acrylic Panels
has esto con paneles de acrilico