Plates and panels
Modular Grid Organizer Assembly
- Bounding box
- 344.8 × 340.0 × 55.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Using the completed connector and panel design, generate a fully engineered assembly. Build a complete 3×3 organizer using identical panels and identical connectors. Show: - Fully assembled isometric view - Exploded assembly - Assembly sequence - Every connector location - Every thumb screw location - Cross-section through the center of the organizer - Bill of Materials - Part numbering - Manufacturing dimensions - Tolerances - Assembly instructions Verify that every panel can be installed, adjusted, removed, and reinstalled using only the thumb screws without damaging the parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel Width | 100 mm | 50 – 200 |
| Panel Height | 80 mm | 50 – 200 |
| Panel Thickness | 5 mm | 3 – 10 |
| Wall Thickness | 3 mm | 2 – 5 |
| Bottom Rib Height | 10 mm | 5 – 20 |
| Rib Thickness | 2 mm | 1 – 4 |
| Bottom Rib Count | 2 | 0 – 5 |
| Top Rib Height | 5 mm | 2 – 10 |
| Top Rib Count | 2 | 0 – 5 |
| Rail Width | 6 mm | 4 – 10 |
| Rail Height | 4 mm | 3 – 8 |
| Connector Size | 40 mm | 30 – 60 |
| Slot Length | 20 mm | 15 – 30 |
| Slot Height | 10 mm | 8 – 15 |
| Slot Depth | 15 mm | 10 – 25 |
| Screw Clearance Hole | 8 mm | 6 – 12 |
| Screw Diameter | 6 mm | 4 – 10 |
| Screw Length | 30 mm | 20 – 50 |
| Screw Head Diameter | 12 mm | 10 – 16 |
| Screw Head Height | 5 mm | 3 – 8 |
| Nut Capture Diameter | 10 mm | 8 – 14 |
| Nut Capture Height | 8 mm | 6 – 12 |
| Exploded View Gap | 10 mm | 5 – 30 |
| Assembly Mode | 3 | 0 – 3 |
| Grid Unit Spacing | 5 mm | 0 – 20 |
| Connector Wall Thickness | 2.5 mm | 2 – 4 |
| Clamping Plate Thickness | 3 mm | 2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service