Loading the interactive model…
Interactive 3D model of Model Jet Engine Turbine ImpellerEverything else
Model Jet Engine Turbine Impeller
4 views
- Bounding box
- 60.0 × 60.0 × 19.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- September 6, 2026
Download
Free to download and use. See the terms.
The prompt
створи крильчатку до турбіни реактивного двиггуна для моделей реакктивних моделей
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter (blade tip) | 60 mm | 30 – 120 |
| Hub Diameter | 20 mm | 10 – 50 |
| Blade Height | 15 mm | 5 – 40 |
| Shaft Bore | 6 mm | 3 – 20 |
| Back Disc Thickness | 4 mm | 2 – 10 |
| Blade Count | 8 | 4 – 16 |
| Blade Thickness | 2 mm | 0.5 – 5 |
| Blade Sweep Angle | 30 deg | 0 – 60 |
| Edge Fillet Radius | 1 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS